對于城市各類建筑來說，山東通風管道工程起著至關重要的作用，通風管道的質量將直接影響到整個工程質量。今天通風管道廠家為大家介紹更好的控制通風管道安裝質量的方法。
For all kinds of buildings in cities, Shandong ventilation pipeline project plays a crucial role, and the quality of ventilation pipeline will directly affect the quality of the whole project. Today, the ventilation pipe manufacturer introduces the better control method of the installation quality of the ventilation pipe.
山東通風管道
Shandong ventilation pipeline
一、施工前的準備工作
1、 Preparation before construction
充分的準備工作是確保風管安裝質量的前提。
Adequate preparation is the premise to ensure the installation quality of air duct.
在準備凈化風管的制作時，無論是采取工廠集中制作還是現場制作方式，都必須保證場地的潔凈和封閉。
When preparing the production of the purification air duct, whether it is centralized production in the factory or on-site production, the site must be clean and closed.
擁有符合條件的采光和照明條件。
Have qualified lighting and lighting conditions.
除此外，還要對制作好的方管進行管理，避免管道被污染。
In addition, we should also manage the square pipes to avoid the pipeline being polluted.
二、風管的橫向連接
2、 Transverse connection of air duct
風管的橫向連接是延續風管長度的一種手段，還具備增強剛度及保持風管精確地橫向尺寸的作用。
The transverse connection of the duct is a means to continue the length of the duct, and also has the function of enhancing the rigidity and keeping the wind duct accurately in the transverse dimension.
通常橫向連接的方式是角鋼法蘭連接，這種連接方式取決于壁厚，更取決于連接種類及板壁加固方式。
Generally, the transverse connection is angle steel flange connection, which depends on the wall thickness, and more depends on the type of connection and the reinforcement of the plate wall.
三、風管材質的選擇
3、 Selection of duct material
為了保證風管的重量，需采用小板厚的風管，但除此外還需要綜合考慮風管的尺寸和壓力級別。
In order to ensure the weight of the duct, the small plate thick air duct is required, but in addition, the size and pressure level of the duct should be considered comprehensively.
從設計角度來看，一個系統可以同時存在幾種對應于不同靜壓級別的風管板厚。
From the design point of view, there are several types of duct plate thickness corresponding to different static pressure levels simultaneously in a system.
四、風管的縱向縫接合
4、 Longitudinal joint of air duct
風管的縱向縫接合方式可以根據實際情況，選擇對應的方式。
The longitudinal joint mode of air duct can be selected according to the actual situation.
在中、低壓風管中常常使用扣式咬口連接，對于矩形風管，聯合咬口使用無任何壓力級別。
Buckle type is often used in medium and low pressure air ducts. For rectangular air ducts, joint bite is not used for any pressure level.
對于立縫和封蓋式立縫可以使用鉚釘、自攻螺絲、點焊、壓凸凹痕等方法緊固。
For vertical joint and cover type vertical joint, rivets, tapping screws, spot welding, indenting and other methods can be used to fasten.
五、風管的存放
5、 Storage of air ducts
預制好的風管，是必須要做好存放工作，以免受到二次污染。
The prefabricated air duct must be stored well to avoid secondary pollution.
可將管口用塑料布等密封材料封住，然后將風管分門別類堆放好。
The pipe mouth can be sealed with plastic cloth and other sealing materials, and then the air duct can be piled up in different categories.
在使用風管前，要注意進行的清洗工作，確定板材表面無腐蝕，干燥后不吸塵。
Before using the air duct, pay attention to the cleaning work to ensure that the surface of the plate is free of corrosion and no dust after drying.
山東通風管道
Shandong ventilation pipeline
因此，嚴格把控好山東通風管道的安裝質量是非常重要的。通風管道現在應用在各個領域，受到廣大群眾的歡迎與喜愛，想要了解更多咨詢，歡迎持續關注我們的信息。
Therefore, it is very important to control the installation quality of ventilation pipes in Shandong Province. Ventilation ducts are now used in various fields, and are welcomed and loved by the masses. For more consultation, we welcome to pay close attention to our information.
上一篇：通風管道設計結合實際的原因!
下一篇：濟南通風管道的通風原則分為幾類？
